URENDA TOOL CO

LOCKING TOOL, MOTOR SHAFT: JERED BROWN BROS INC. DRAWING NUMBER C554AX501, REV. A (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

LOCKING TOOL, MOTOR SHAFT: JERED BROWN BROS INC. DRAWING NUMBER C554AX501, REV. A (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

LOCKING TOOL, MOTOR SHAFT: JERED BROWN BROS INC. DRAWING NUMBER C554AX501, REV. A (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

VALVE TOOL ASSEMBLY: IAW UNITED STATES NAVY NAVAL SEA SYSTEMS COMMAND DRAWING NUMBER 803-5959296-TA. (EXCEPTIONS APPLY)(PARTIAL DESCRIPTION)

YOKE, BALL PULLER: IAW NAV SEA SYSTEM COMMAND DRAWING NO. 803-5959307 REV-A DTD JAN.1992. NSN 5120-01-354-7641, P/N 101. NAVSEA 8.0" STRAIGHT LINE TOP LOAD BALL VALVE. EXCEPTION(S) TO TECHNICAL DOCUMENT: MK EA TOOL IN A PERM/LEG MANNER W/DWG.NO. & MF

INSTALLATION TOOL,RETAINING RING IN ACCORDANCE WITH TRIDAIR DRAWING NUMBER CA21062-00-T10, REVISION B, DATED 06/11/79 ITEM NUMBER CA21062-4-T10

TOOL, TORQUE, EXTENSION: IAW US ARMY DRAWING NUMBER 13016047, REV. A, DATED 1/23/2014. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

ADAPTER, TORQUE WRENCH: IAW U.S. ARMY MATERIAL READINESS COMMAND DRAWING NUMBER 7078072 EXCEPTIONS TO DRAWING: UNLESS OTHERWISE SPECIFIED, BREAK ALL SHARP EDGES, CORNER AND VERTICES TO 1/32 RADIUS. DELETE "1/16 R" AND SUBSTITUTE "1/8 R". DELETE "25/6

TOOL, TORQUE, EXTENSION: IAW US ARMY DRAWING NUMBER 13016047, REV. A, DATED 1/23/2014. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

VALVE TOOL ASSEMBLY IAW UNITED STATES NAVY, NAVAL SEA SYSTEMS COMMAND ASSEMBLY NUMBER 803-5959296-TA: MARK EACH ITEM IN A PERMANENT AND LEGIBLE MANNER WITH MFG'S PN AND NAME OR IDENTIFYING SYMBOL. PKG IAW STANDARD COMMERCIAL PRACTICE. PK IAW STANDARD

TIRE IRON: IAW ORDNANCE DEPARTMENT, DEPARTMENT OF THE ARMY, DETROIT ARSENAL DRAWING NUMBER 8366453, REVISION B, DATED 10/11/1955 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, STRAP: IAW MARTIN MARIETTA TECHNOLOGIES, INC. DRAWING NUMBER 1214C2666, REV. D, DATED 7/29/1985 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, STRAP: IAW MARTIN MARIETTA TECHNOLOGIES, INC. DRAWING NUMBER 1214C2666, REV. D, DATED 7/29/1985 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, STRAP: IAW MARTIN MARIETTA TECHNOLOGIES, INC. DRAWING NUMBER 1214C2666, REV. D, DATED 7/29/1985 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, STRAP: IAW MARTIN MARIETTA TECHNOLOGIES, INC. DRAWING NUMBER 1214C2666, REV. D, DATED 7/29/1985 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, STRAP: IAW MARTIN MARIETTA TECHNOLOGIES, INC. DRAWING NUMBER 1214C2666, REV. D, DATED 7/29/1985 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, STRAP: IAW MARTIN MARIETTA TECHNOLOGIES, INC. DRAWING NUMBER 1214C2666, REV. D, DATED 7/29/1985 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, STRAP: IAW MARTIN MARIETTA TECHNOLOGIES, INC. DRAWING NUMBER 1214C2666, REV. D, DATED 7/29/1985 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

TOOL, TORQUE, EXTENSION: IAW US ARMY DRAWING NUMBER 13016047, REV. A, DATED 1/23/2014. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

TOOL, TORQUE, EXTENSION: IAW US ARMY DRAWING NUMBER 13016047, REV. A, DATED 1/23/2014. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

TOOL,COIL CABLE

WRENCH, SOCKET: IAW DEPARTMENT OF THE NAVY, NAVAL ORDNANCE SYSTEMS COMMAND DRAWING 2894162 REVISION A, DATED JUNE 21, 1977. EXCEPTION TO DRAWING: INTERPRET DRAWING IAW MIL-DTL-31000 IN LIEU OF MIL-D-1000 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

LOCKING TOOL, MOTOR SHAFT: JERED BROWN BROS INC. DRAWING NUMBER C554AX501, REV. A (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PULLER, SHAFT SLEEVE: IAW M.T. DAVIDSON CO. DRAWING NUMBER GCP623, REVISION B. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PULLER, SHAFT SLEEVE: IAW M.T. DAVIDSON CO. DRAWING NUMBER GCP623, REVISION B. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

ADAPTER, TORQUE WRENCH: IAW LOCKHEED AIRCRAFT CORPORATION, GEORGIA DIVISION DRAWING NUMBER 403188, REVISION E, DATED 6/11/1966 EXCEPTION TO DRAWING: IN LIEU OF CADMIUM, USE ALTERNATE COATING: OXIDE. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

ADAPTER, TORQUE WRENCH: IAW LOCKHEED AIRCRAFT CORPORATION, GEORGIA DIVISION DRAWING NUMBER 403188, REVISION E, DATED 6/11/1966 EXCEPTION TO DRAWING: IN LIEU OF CADMIUM, USE ALTERNATE COATING: OXIDE. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PULLER, SHAFT SLEEVE: IAW M.T. DAVIDSON CO. DRAWING NUMBER GCP623, REVISION B. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PULLER, SHAFT SLEEVE: IN ACCORDANCE M.T. DAVIDSON CO. DRAWING NUMBER GCP623, REV. B. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

TOOL,COIL CABLE

TOOL,COIL CABLE

SCREWDRIVER ATTACHMENT, SOCKET WRENCH: IAW LOCKHEED AIRCRAFT CORP. DRAWING NO. 3402046, REV. G DATED 8/28/87 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

LOCKING TOOL, MOTOR SHAFT: JERED BROWN BROS INC. DRAWING NUMBER C554AX501, REV. A (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

LOCKING TOOL, MOTOR SHAFT: JERED BROWN BROS INC. DRAWING NUMBER C554AX501, REV. A (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

TOOL,COIL CABLE

SOCKET, WRENCH, FACE SPANNER: IAW DEPARTMENT OF THE NAVY, NAVAL SEA SYSTEMS COMMAND DRAWING NUMBER 6375303, REVISION A, DATED 5/14/91. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

TOOL,COIL CABLE

SCREWDRIVER ATTACHMENT, SOCKET WRENCH: IAW U.S. ARMY TANK AUTOMOTIVE COMMAND DRAWING 12384651, DATED 5 MAR 90. PN 12381651-2. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEAD FORMERLY 1B107.9 CAT 21 WRENCH, CROWFOOT FORMERLY 1B107.21 CAT 39 OPEN END WRENCHE

WRENCH,LANDING GEAR NOSE

TOOL,COIL CABLE

SCREWDRIVER ATTACHMENT, SOCKET WRENCH: IAW LOCKHEED AIRCRAFT CORP. DRAWING NO. 3402046, REV. G DATED 8/28/87 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

SCREWDRIVER ATTACHMENT, SOCKET WRENCH: IAW LOCKHEED AIRCRAFT CORP. DRAWING NO. 3402046, REV. G DATED 8/28/87 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

TOOL,COIL CABLE

TOOL,COIL CABLE

TOOL,COIL CABLE

TOOL,COIL CABLE

REMOVER, TRANSFER VALVE: IAW LOCKHEED-CALIFORNIA CO. DRAWING 925312, REVISION F DATED 4/28/65. PN 925312-1 EXCEPTION TO DRAWING: IN LIEU OF CADMIUM PLATING, SUBSTITUTE NICKEL, ZINC, OR BLACK OXIDE. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

REMOVER, TRANSFER VALVE: IAW LOCKHEED-CALIFORNIA CO. DRAWING 925312, REVISION F DATED 4/28/65. PN 925312-1 EXCEPTION TO DRAWING: IN LIEU OF CADMIUM PLATING, SUBSTITUTE NICKEL, ZINC, OR BLACK OXIDE. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, OPEN END BOX: IAW FAIRBANKS MORSE ENGINE DIVISION DRAWING NUMBER P12612840 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)