PARAGON SPACE DEVELOPMENT CORPORATION

STTR PHASE I - DEEP-SPACE ANOMALY SOLUTION FOR HABITAT ASSISTANCE AND RESOLUTION AID (DASHARA)

AUTHORIZE AND FUND CLINS 0001 & 0002 FOR FISCAL YEAR (FY) 2026.

PHASE I SBIR - MULTISTAGE UMBILICAL DISCONNECT (MUD) SYSTEM

RESEARCH AND DEVELOPMENT

ADD FUNDING IN THE AMOUNT OF $366,931.08 FOR MILESTONE 2.

THE BUILD, TEST, AND DELIVERY OF 60 BPA BLADDERS.

RESEARCH AND DEVELOPMENT.

RESEARCH AND DEVELOPMENT

THE PURPOSE OF THIS TASK ORDER (TO) IS TO UPDATE THE EXISTING BPA DETRUSOR DESIGN AND DELIVER THE UPDATED DETRUSOR HARDWARE TO NASA THAT WILL REPLACE THE EXISTING BPA DETRUSOR ABOARD THE INTERNATIONAL SPACE STATION (ISS).

MAINTAIN NOMINAL BPA OPERATIONS THROUGH DECEMBER 2030 ABOARD THE INTERNATIONAL SPACE STATION (ISS).

BPA BLADDER PURCHASE AND DELIVERY

SUSTAINING SERVICES FOR THE BRINE PROCESSOR ASSEMBLY (BPA) ON ISS (CLIN 0001 & 0002) FOR CALENDAR YEAR (CY) 2024

PHASE II AWARD

KICK-OFF BRIEFING MATERIALS & FWA CERT.

FY24 SBIR PHASE II - SOFTGOODS WEBBING INTEGRATED STRAIN SENSOR FOR INFLATABLE

PARAGON SHALL REVIEW AND APPROVE A CMC/JCCT PROVIDED LAUNCH CONFIGURATION DESIGN OF THE BPA DETRUSOR.

BUILD, TEST, AND DELIVERY OF BRINE PROCESSOR ASSEMBLIES (BPA) BLADDERS.857124-221

SUSTAINING SERVICES FOR THE BRINE PROCESSOR ASSEMBLY (BPA) ON ISS

SUSTAINING SERVICES FOR THE BRINE PROCESSOR ASSEMBLY (BPA) ON ISS

STTR PHASE II - SPACESUIT COVER AGAINST THE ABRASIVE LUNAR ENVIRONMENT (SCALE) & EXPLORATION TEXTILE FOR HIGH OXYGEN ENVIRONMENTS

PARAGON SHALL REVIEW AND APPROVE A CMC/JCCT PROVIDED LAUNCH CONFIGURATION DESIGN OF THE BPA DETRUSOR (505600150,

SMALL BUSINESS SET-ASIDE, 63 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.

COMPLETE DATA INTEGRATION TESTING OF THE 2 NEW SENSORS THAT WILL BE ADDED AT THE ISS BPA EXHAUST OUTLET ON ISS (HUMIDITY AND AIR FLOW).

SUSTAINING SERVICES FOR THE BRINE PROCESSOR ASSEMBLY (BPA) ON ISS

BUILD, TEST, AND DELIVERY OF BRINE PROCESSOR ASSEMBLIES (BPA) BLADDERS.857124-221

SUSTAINING SERVICES FOR THE BRINE PROCESSOR ASSEMBLY (BPA) ON THE INTERNATIONAL SPACE STATION (ISS)

FY23 SBIR PHASE I - SOFTGOODS WEBBING INTEGRATED STRAIN SENSOR FOR INFLATABLE

CRYOGENIC ENCAPSULATING LAUNCH SHROUD AND INSULATED UPPER STAGE (CELSIUS)

PHASE I AWARD

SUSTAINING SERVICES FOR THE BRINE PROCESSOR ASSEMBLY (BPA) ON THE INTERNATIONAL SPACE STATION (ISS)

TASK ORDER 2 FOR 28 ADDITIONAL BRINE PROCESSOR ASSEMBLY (BPA) BLADDERS

BASELINE CONTRACT SUPPORT AND SPARES CONSUMABLES PLANNING FOR FY2023

STANDARD OPERATIONS SUPPORT SERVICES FOR FY2023

EO14042 RECOVERY OF POTABLE WATER FROM WASTEWATER IS ESSENTIAL TO THE SUCCESS OF LONG-DURATION HUMAN SPACEFLIGHT. FOR HUMAN MISSIONS TO MARS, THE TECHNOLOGY MATURATION (TA 207) OBJECTIVE IS TO RECOVER GREATER THAN 98 PERCENT OF THE WATER FROM WASTEWATER SOURCES (URINE, HUMIDITY CONDENSATE, ETC.). THIS CONTRACT IS FOR THE DEVELOPMENT OF IONOMER-MEMBRANE WATER PROCESSOR (IWP) BRINE PROCESSOR FOR FLIGHT DEMONSTRATION ON THE INTERNATIONAL SPACE STATION (ISS). REQUIREMENTS FOR THE BRINE PROCESSOR WILL BE BASELINED BY NASA AND AGREED TO BY THE CONTRACTOR UNDER THE PHASE III SBIR NNX16CJ02C. AN ISS FLIGHT DEMONSTRATION IS NEEDED TO VALIDATE AND FULLY CHARACTERIZE BRINE PROCESSOR SYSTEM PERFORMANCE IN A RELEVANT ENVIRONMENT FOR FUTURE EXPLORATION MISSIONS. THE RELEVANT ENVIRONMENT IN THIS CASE INCLUDES BOTH MICRO-GRAVITY AND LONG-DURATION EXPOSURE TO MICRO-G CREW-PRODUCED BRINE VIA THE URINE PROCESSOR. THE BRINE PROCESSOR WILL BE FLOWN AS A CLASS 1E PIECE OF HARDWARE. TASKS INCLUDE 1) COMPLETE TECHNOLOGY MATURATION OF KEY COMPONENT SUBSYSTEMS OF THE IWP FROM THE PHASE III SBIR INCLUDING BLADDER HEAT SEALING, LOW-PROFILE SIDE-MOUNTED FILL PORT, DETRUSOR AND SYSTEM COMPATIBILITY WITH INADVERTENT EXPOSURE TO 14.7 PSIG DURING BRINE FILL 2) SYSTEM DESIGN CYCLE INCLUDING HEATER AND ENERGY MANAGEMENT TRADE 3) INTEGRATED SYSTEM AND COMPONENT PRELIMINARY DESIGN 4) INTEGRATED SYSTEM AND COMPONENT FINAL DESIGN AND REVIEW 5) MANUFACTURING OF ONE COMPLETE IWP ASSEMBLY, 42 BLADDERS (18 FOR QUALIFICATION TESTING AND 24 FOR FLIGHT), ONE NON-OPERATING TRAINING UNIT WITH SPARES 6) PROTOFLIGHT QUALIFICATION TESTING AND BLADDER ACCEPTANCE TESTING 7) HARDWARE ACCEPTANCE REVIEW AND DELIVERY OF A BRINE PROCESSOR AND ASSOCIATED CONSUMABLES, FOR AN ISS TECHNOLOGY DEMONSTRATION 8) POST-DELIVERY AND ON-ORBIT SUPPORT WHICH INCLUDES GENERATION OF OPERATIONS AND MAINTENANCE HANDBOOK FOR USE BY NASA IN SUPPORT OF CREW TRAINING AND THE DEVELOPMENT OF ON-ORBIT OPERATIONS AND MAINTENANCE, CREW TRAINING

TASK ORDER 4 FOR CLIN0002 STANDARD OPERATIONS SUPPORT FOR FY 22

SMALL BUSINESS SET-ASIDE, 63 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.