DLM ENTERPRISES INC.

SOCKET, SOCKET WRENCH: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.2 - 2002. TYPE I: SOCKETS (12-POINT) CLASS 4: REGULAR LENGTH, THIN WALL SQUARE DRIVE SZ: 3/4 INCH WRENCH OPENING: 3/4 INCHES MATERIAL: STEEL COATING: BLACK OXID

IMPACT WRENCH (PNEUMATIC)

MULTI-TOOL

MULTI-TOOL, FOLDING, POCKET: - SEE ATTACHED DOCUMENT FOR DETAIL.

JIG SAW (ELECTRIC)

TOOL KIT, ELECTRONIC SYSTEM: SEE DESCRIPTION IN BPA

TOOL KIT, ELECTRONIC SYSTEM: SEE DESCRIPTION IN BPA

TOOL KIT, ELECTRONIC SYSTEM: SEE DESCRIPTION IN BPA

TOOL BOX (PORTABLE)

TOOL BOX (PORTABLE)

TOOL BOX, PORTABLE:

CENTER CONTACT HOLDER

MOBILE TOOL CABINET (CHEST TOP)

JACK, HYDRAULIC, HAND: IAW U.S. ARMY MOBILITY EQUIPMENT, RESEARCH AND DEVELOPMENT COMMAND, DRAWING NUMBER 13228E6028, DATED 3/31/1989 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

SLIP JOINT PLIERS (STRAIGHT NOSE)

MOBILE TOOL CABINET (TOP CHEST)

TOOL BOX (PORTABLE)

MOBILE TOOL CABINET (CHEST TOP)

TOOL BOX, PORTABLE: - SEE ATTACHED DOCUMENT FOR DETAIL.

TOOL BOX (PORTABLE)

TOOL BOX, PORTABLE: - SEE ATTACHED DOCUMENT FOR DETAIL.

TOOL BOX, PORTABLE: RALSTON INSTRUMENTS COMPANY, PN QTAP CASE OVERALL LENGTH: 16-1/2 INCHES OVERALL HEIGHT: 7-1/2 INCHES OVERALL WIDTH: 9-1/2 INCHES FEATURES: POSITIVE LATHES AND RECESSED HANDLES, MOLDED INTERIOR FORM HOUSINGS, YIELD YELLOW

PUTTY KNIFE

SCALER, NEEDLE, PNEUMATIC: OVERALL LENGTH: 7.7 INCHES MAX OPERATING AIR PRESSURE: 90 PSI OPERATING AIR CONSUMPTION: 6 CFM STROKE LENGTH: 0.5 INCH HANDLE TYPE: BODY GRIP THROTTLE TYPE: LEVER IMPACT RATE: 7000 BPM POSSIBLE NEEDLE CONFIGURATIONS: 1

SANDER, DISC, PNEUMATIC, PORTABLE: TYPE: ANGLE, 90 DEGREES NO LOAD SPEED: 5400 TO 6000 RPM HORSEPOWER: 3/4 HP MINIMUM PAD SZ DIAMETER: 7 INCHES MINIMUM ANGLE HEIGHT OVER SPINDLE: 4-1/2 INCHES MAX AIR INLET: 1/4 INCH NPT OR NPTF OPERATING AIR PRE

WRENCH, IMPACT, PNEUMATIC: IAW THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B107.4 2005. SQUARE DRIVE SZ: 3/4 INCH HANDLE TYPE: PISTOL GRIP CAPACITY: 700 FOOT-POUNDS MINIMUM SPECIAL FEATURES: WORKING TORQUE RANGE - 100 TO 500 FOOT-POUNDS

ROTARY TOOL KIT, ELECTRIC, PORTABLE: TYPE: STRAIGHT HANDLE TYPE VOLTAGE RATING: 120 VAC AMPERAGE: 1.6 AMPS CORDED: 6 FT MIN. FREQUENCY RATING: 60 HZ SPEED: VARIABLE FROM 5,000 TO 35,000 RPM FEATURES INCLUDED: 6 ATTACHMENTS, 50 ACCESSORIES AND PL

WRENCH, IMPACT, PNEUMATIC: - SEE ATTACHED DOCUMENT FOR DETAIL.

WRENCH, PLUG: END ITEM IDENTIFICATION: CRANE PUMPS MODEL 777H-440 AND 777D-440 CRANE PUMPS SYSTEM PN 5686AB (PARTIAL DESCRIPTION) IQ

SHEARS, METAL CUTTING, ELECTRIC: PRODUCT MADE IN THE USA. PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER DETAILS.

WRENCH, IMPACT, PNEUMATIC: IAW CID A-A-2691A, NOTICE 2 DATED AUGUST 9, 2005. BOLT CAPACITY: 1.25 INCH HANDLE: CLOSED GRIP SPINDLE SQUARE DRIVE SZ: 1 INCH SPINDLE OFFSET: 2.5 INCHES MAX. OPERATING AIR PRESSURE: 80 TO 100 PSIG AIR CONSUMPTION: 65

DRILL, ELECTRIC, PORTABLE: CHUCK TYPE: KEYED 3 JAW CHUCK CAPACITY: 3/8 INCH HANDLES TYPE: PISTOL GRIP RATED VOLTAGE: 120 VAC; 60 HERTZ. RATED CURRENT: 5 AMP MIN SPEED: VARIABLE NO LOAD SPEED RATE: 1000 - 1400 RPM TORQUE: 275 INCH-POUNDS MIN CARR

SANDER, OSCILLATING PAD, PNEUMATIC, PORTABLE: ORBIT DIAMETER: 5/32 INCH MIN NO LOAD SPEED: 6000 - 9000 OPM MIN RANGE OPERATING AIR PRESSURE: 90 PSI OPERATING AIR CONSUMPTION: 18 CFM MAX ABRASIVE AREA: 15 TO 20 SQUARE INCHES PAPER SZ: 3 X 6 INCHE

SAW, RECIPROCATING, PORTABLE, ELECTRIC: VOLTAGE: 18 VDC AMPERAGE: 2 AMP MIN STROKE LENGTH: 0.875 INCHES MINIMUM NO LOAD SPEED: 3000 SPM MAX TOOL WEIGHT: 13.0 POUNDS MAX FEATURES: TOOL-LESS (OR KEYLESS) BLADE CLAMP, PIVOT SHOE, AND ELECTRIC BRAKE

SANDER, DISC, PNEUMATIC, PORTABLE: TYPE: ANGLE, 90 DEGREES NO LOAD SPEED: 5400 TO 6000 RPM HORSEPOWER: 3/4 HP MINIMUM PAD SZ DIAMETER: 7 INCHES MINIMUM ANGLE HEIGHT OVER SPINDLE: 4-1/2 INCHES MAX AIR INLET: 1/4 INCH NPT OR NPTF OPERATING AIR PRE

DRILL, ELECTRIC, PORTABLE: - SEE ATTACHED DOCUMENT FOR DETAIL.

DRILL, PNEUMATIC, PORTABLE: DRIVE TYPE: ANGULAR DRIVE ANGLE: 90-DEGREE CHUCK TYPE: KEYED JAW CHUCK SZ: 1/4-INCH AIR INLET CONNECTION: 1/4 INCH HANDLE TYPE: BODY GRIP WEIGHT : 4.25 POUNDS MAX SPEED @ 0.75 FT-LBS TORQUE: 1400 RPM MINIMUM OPERATING

WRENCH, IMPACT, PNEUMATIC: IAW CID A-A-2691A, NOTICE 2 DATED AUGUST 9, 2005. BOLT CAPACITY: 1.25 INCH HANDLE: CLOSED GRIP SPINDLE SQUARE DRIVE SZ: 1 INCH SPINDLE OFFSET: 2.5 INCHES MAX. OPERATING AIR PRESSURE: 80 TO 100 PSIG AIR CONSUMPTION: 65

DRILL, ELECTRIC, PORTABLE: CHUCK TYPE: KEYED 3 JAW CHUCK CAPACITY: 3/8 INCH HANDLES TYPE: PISTOL GRIP RATED VOLTAGE: 120 VAC; 60 HERTZ. RATED CURRENT: 5 AMP MIN SPEED: VARIABLE NO LOAD SPEED RATE: 1000 - 1400 RPM TORQUE: 275 INCH-POUNDS MIN CARR

WRENCH, IMPACT,ELECTIRC:SEE DESCRIPTION IN SPQ WRENCH IS MADE MEXICO.

WRENCH, IMPACT, ELECTRIC: DRIVE: SQUARE DRIVE SZ: 1/2 INCH HANDLE STYLE: PISTOL GRIP VOLTAGE: 120 VAC, 60 HZ CURRENT RATING: 4 AMP MIN. NO LOAD SPEED: 1600 RPM MIN. IMPACTS RATE AT FULL LOAD: 2000 BPM TORQUE: 120 FOOT-POUNDS MIN. IN 5 SECONDS OF

COMPUTER REPAIR KIT

GRINDER,DIE,PNEUMATIC,PORTABLE INGERSOLL-RAND COP/N: G1A200RG4 IQ

WRENCH, IMPACT, PNEUMATIC: - SEE ATTACHED DOCUMENT FOR DETAIL.

TOOL KIT, ELECTRONIC SYSTEM: - SEE ATTACHED DOCUMENT FOR DETAIL.

SANDER, DISC, PNEUMATIC, PORTABLE: TYPE: ANGLE, 90 DEGREES NO LOAD SPEED: 5400 TO 6000 RPM HORSEPOWER: 3/4 HP MINIMUM PAD SZ DIAMETER: 7 INCHES MINIMUM ANGLE HEIGHT OVER SPINDLE: 4-1/2 INCHES MAX AIR INLET: 1/4 INCH NPT OR NPTF OPERATING AIR PRE

TOOL KIT, ELECTRONIC SYSTEM: - SEE ATTACHED DOCUMENT FOR DETAIL.

WRENCH, IMPACT, PNEUMATIC: - SEE ATTACHED DOCUMENT FOR DETAIL.

DRILL, ELECTRIC, PORTABLE: CHUCK TYPE: KEYED 3 JAW CHUCK CAPACITY: 3/8 INCH HANDLES TYPE: PISTOL GRIP RATED VOLTAGE: 120 VAC; 60 HERTZ. RATED CURRENT: 5 AMP MIN SPEED: VARIABLE NO LOAD SPEED RATE: 1000 - 1400 RPM TORQUE: 275 INCH-POUNDS MIN CARR

DRILL, ELECTRIC, PORTABLE: - SEE ATTACHED DOCUMENT FOR DETAIL.