GINER INC

SBIR I MULTI-PURPOSE FLAME RETARDANT MATERIALS FOR HABITATION SOLUTIONS

FY25 SBIR PHASE III - REGENERATIVE FUEL CELL (RFC) 2 KW FUEL CELL PROJECT

PHASE II SBIR 80NSSC25C0004 HIGH ENERGY DENSITY, FAST DISCHARGE LI-S BATTERIES FOR ELECTRIFIED AIRCRAFT PROPULSION

SBIR PHASE III STATIC VAPOR FEED ELECTROLYSIS CELL STACK REDESIGN

REGENERATIVE FUEL CELL ELECTROLYZER

NIMH SBIR PHASE I TOPIC 001- POINT-OF-CARE HIV VIRAL LOAD AND DRUG ADHERENCE ASSAYS

FY24 SBIR PHASE I- HIGH ENERGY DENSITY, FAST DISCHARGE LI-S BATTERIES FOR ELECTRIFIED AIRCRAFT PROPULSION

NEXT GENERATION ELECTROCHROMIC MATERIALS FOR DYNAMICALLY TINTING EYEWEAR

SBIR PHASE III STATIC VAPOR FEED ELECTROLYSIS CELL STACK REDESIGN

COST OVERRUN MOD

REGENERATIVE FUEL CELL ELECTROLYZER

POINT-OF-CARE MONITORING OF ADHERENCE TO ANTIRETROVIRAL HIV THERAPY

THIS STATEMENT OF WORK (SOW) ADDRESSES THE REDESIGN OF THE GINER 3,600 PSI HIGH PRESSURE CELL STACK TO RESOLVE VOLTAGE STABILITY ISSUES. PREVIOUSLY, UNDER CONTRACT NNM15AA09C, GINER DESIGNED, ASSEMBLED AND TESTED A HIGH PRESSURE CELL STACK. THE EFFORT INVOLVED MODIFYING AN EARLIER DESIGN TO INCORPORATE DESIGN IMPROVEMENTS TO RESOLVE LEAKAGE ISSUES. GINER SUCCESSFULLY DEMONSTRATED ~5,000 HOURS OF OPERATION, WITH NO LEAKAGE ISSUES. HOWEVER, THIS DESIGN EXHIBITED A HIGHER VOLTAGE THAN EXPECTED. EARLIER EFFORTS DEMONSTRATED A STABLE, FLAT VOLTAGE OF ~1.8 V, WHILE THIS CELL STACK EXHIBITED RISING VOLTAGE UP TO ~2.0 V. A FAULT TREE WAS DEVELOPED TO IDENTIFY THE POSSIBLE CAUSES. THE LIKELY CAUSE WAS IDENTIFIED TO BE LACK OF COMPLIANCE IN THE CELLS, WHICH LIKELY RESULTED IN OVER COMPRESSING AND DEHYDRATING OF THE MEMBRANES. IN ADDITION, THE CATHODE SCREENS EXPERIENCED A HEIGHT REDUCTION, RESULTING IN INCREASED RESISTANCE. THIS SBIR PHASE III EFFORT SHALL REQUIRE GINER TO REDESIGN SPECIFIC COMPONENTS OF THE STACK HARDWARE TO ENHANCE COMPLIANCE TO RESOLVE THE HIGH RESISTANCE AND VOLTAGE ISSUES. GINER WILL INCORPORATE A PRESSURE PAD INTO THE CATHODE COMPARTMENT OF THE CELLS TO MINIMIZE OVER COMPRESSION OF THE SCREEN AND MEMBRANE. A FOUR CELL STACK WILL BE ASSEMBLED AND PRE-TEST HEALTH CHECKS WILL BE PERFORMED. ENDURANCE TESTING WILL BE CONDUCTED TO VERIFY PERFORMANCE AND LIFE. THE STACK SHALL BE OPERATED CONTINUOUSLY AT 3600 PSI. AT THE COMPLETION OF ENDURANCE TESTING, POST-TEST HEALTH CHECKS SHALL BE PERFORMED. GINER SHALL ALSO BE REQUIRED TO ANALYZE THE DATA AND WRITE A FINAL REPORT. GINER SHALL BE REQUIRED TO DELIVER THE CELL STACK AND FINAL REPORT TO MSFC.

MEDICAL & RESEARCH DEVELOPMENT CONTRACT FOR DHA STTR PHASE II A2- 9499 PROPOSAL TITLED "RAPID AND REPROGRAMMABLE ASSAY FOR MULTIPLEXED GENE DETECTION"

E014042 P3 DEAD ENDED PASSIVE ELECTROLYZER

E014042 REGENERATIVE FUEL CELL ELECTROLYZER

EO14042 SBIR PHASE I AN ANTIBODY MICROARRAY FOR THE DETECTION OF LIFE SIGNATURES IN OCEAN WORLD SAMPLES

E014042 P3 DEAD ENDED PASSIVE ELECTROLYZER

REGENERATIVE FUEL CELL ELECTROLYZER

E014042 SBIR PHASE III STATIC VAPOR FEED ELECTROLYSIS CELL STACK REDESIGN

RESEARCH AND DEVELOPMENT

LITHIUM-SULFUR BATTERIES FOR AIR FORCE APPLICATIONS