TIMBER EDGE MACHINE INC.

INSERTER AND REMOVER, SEAL: IAW US ARMY AVIATION AND MISSILE COMMAND DRAWING NUMBER RTTC08253. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PLIERS: IAW GENERAL SERVICES ADMINISTRATION DRAWING NUMBER 188-3250, DATED 29 APRIL 1966. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PULLER, PITCH BEAM: IAW SIKORSKY AIRCRAFT DRAWING NUMBER 65700-10048, REVISION E2. PN 65700-10048-041 EXCEPTION TO DRAWING: FINISH SHALL BE NICKEL, PHOSPHATE OR BLACK OXIDE COATING IN LIEU OF CADMIUM PLATE (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

HOOK, MATERIAL HANDLING, HAND: IAW GSA DRAWING 288-6527, DATED 7 JULY 1987. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

ADJUSTING TOOL,VALVPPET: LOCKHEED MARTIN CORP. PN 1214C3239 (PARTIAL DESCRIPTION)

PUNCH, DRIVE PIN: IAW NAVY DEPARTMENT BUREAU OF SHIPS DRAWING NUMBER S2603-840327, DATED AUGUST 24, 1945, REVISION D, DATED DECEMBER 28, 1966. PIECE NUMBER 12, ASSEMBLING PUNCH; SZ: 1-1/2 INCH. EXCEPTION TO DRAWING: DELETE REFERENCE TO MIL-T-18291 AN

INSERTER AND REMOVER, THERMOSWITCH: IAW NAVAL SEA SYSTEMS COMMAND DRAWING 3245106, REV E, DATED 16 AUGUST 1988. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, FUZE SETTING: IAW DEPARTMENT OF THE NAVY, NAVAL SEA SYSTEMS COMMAND, DRAWING NUMBER 5525401, DATED 3/17/1981 DASH NUMBER 1 EXCEPTION TO DRAWING: USE MIL-DTL-16232 IN LIEU OF DOD-P-16232 COATING: PHOSPHATE (EXCEPTIONS APPLY) (PARTIAL DESCRIPTI

PLIERS, SPECIAL: IAW DEPARTMENT OF THE NAVAL SEA SYSTEMS COMMAND DRAWING NUMBER 5268094, DATED 2-4-81 EXCEPTION TO DRAWING: USE THE FOLLOWING SUBSTITUTIONS: 1) AWS C3.4 SPECIFICATION FOR TORCH BRAZING; 2) AWS C3.5 SPECIFICATION FOR INDUCTION BRAZING;

LAPPING TOOL JIG, VALVE SEAT: IAW NAVAL SHIP SYSTEMS COMMAND DRAWING 803-2177525 REVISION M, DATED APRIL 13, 2001. PN 53. VALVE SZ: 1.00 INCH LAPPING TOOL JIG, VALVE SEAT GENERAL CHARACTERISTICS: CARBON STEEL; FOR 1 IN. VALVE; 1-1/4 IN. W X 4-1/4 IN.

ADAPTER, TORQUE WRENCH:IAW U.S. NAVAL SHIP SYSTEMS COMMAND DRAWING NUMBER 2588756, REV. A. EXCEPTIONS TO DRAWING: USE MIL-S-46172 IN LIEU OF MIL-S-13048 USE ASTM A304IN LIEU OF QQ-S-624 USEQQ-S-698 IN LIEU OF QQ-S-626 COATING: CHROME (EXCEPTIONS APPL

WRENCH ASSEMBLY, ADJUSTABLE: IAW DEPARTMENT OF THE ARMY, ORDNANCE DEPARTMENT FIRE CONTROL DIVISION FRANKFORD ARSENAL DRAWING NUMBER 7631852 REVISION B3, DATED APRIL 1,1964. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

ADAPTER, TORQUE WRENCH: IAW U. S. ARMY TANK AUTOMOTIVE COMMAND DRAWING 12298105 REVISION A, DATED 4/15/82. PN 12298102-2 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

KEY, SOCKET HEAD SCREW: IAW ENGINEERING DEPARTMENT (SSI), NAVAL AIR ENGINEERING CENTER, DRAWING NUMBER 425785 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, OPEN END: IAW DEPARTMENT OF THE NAVY, NAVAL ORDNANCE SYSTEMS COMMAND DRAWING NUMBER 3000436 REVISION A, DATED 07 JULY 1977 EXCEPTION(S) TO DRAWING: INTERPRET DRAWING IAW ASME-Y14.100 IN LIEU OF MIL-D-1000 MATERIAL: USE ASTM B124: COPPER AND C

LAPPING TOOL, VALVE SEAT: IAW NAVAL SHIP SYSTEMS COMMAND DRAWING NUMBER 803-2177525, REVISION G, DATED 31 OCT 78, PIECE NUMBER 51. P/N 803-2177525-X8XX-51, SZ: 2. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, SPANNER: IAW NAVAL DEPARTMENT, BUREAU OF ORDINANCE DRAWING 437781, DATED 06-23-44 AND REVISION A2, DATED 09-10-46. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

LAPPING TOOL JIG, VALVE SEAT: IAW NAVAL SHIP SYSTEMS COMMAND DRAWING 803-2177525 REVISION M, DATED APRIL 13, 2001. PN 53. VALVE SZ: 1.00 INCH LAPPING TOOL JIG, VALVE SEAT GENERAL CHARACTERISTICS: CARBON STEEL; FOR 1 IN. VALVE; 1-1/4 IN. W X 4-1/4 IN.

KEY, SOCKET HEAD SCREW: IAW BUREAU OF ORDNANCE, NAVY DEPARTMENT, DRAWING NUMBER 856295 REV. C, DATED 3/20/1967 ASSEMBLY 856295-2 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

TENSIONER, CABLE: IAW NAVAL AIR ENGINEERING CENTER DRAWING NUMBER 521293, DATED JUNE 29, 1984. PN 521293-1. EXCEPTION TO DRAWING: NOTE 1. OMIT FINISH REQUIREMENT (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

INSERTER, BEARING AND BUSHING: IAW SIKORSKY AIRCRAFT DRAWING 65700-40030, DATED 04-02-71, AND REV A, DATED 02-28-72. PIECE NUMBER 041. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

LIFTING TOOL, RAST SYSTEM: IAW NAVAL AIR WARFARE CENTER DRAWING NUMBER 524275 DATED DECEMBER 12, 1992. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

DEPRESSOR, SPRING: IAW ALLISON DIVISION, GENERAL MOTORS CORP., DRAWING NUMBER 6796975 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

LAPPING TOOL, VALVE SEAT: IAW NAVAL SHIP SYSTEMS COMMAND DRAWING NUMBER 803-2177525, REVISION H, DATED 08/24/83, PN 803-2177525-X7XX-50. EXCEPTION(S) TO DRAWING: STEEL: FORGINGS AND BARS FOR HULLS, ENGINES AND ORDNANCE (HEAT TREATED); USE MIL-S-24093

WRENCH, VALVE SEAT: IAW DEPARTMENT OF THE NAVY, NAVAL SHIP SYSTEMS COMMAND DRAWING NUMBER 803-1385623 REVISION P, DATED JULY 11, 2000. PN 803-1385623-034-55, VALVE SZ 3. EXCEPTIONS TO DRAWING: COATING: WRENCH SHALL HAVE EITHER A CHEMICALLY PRODUCED O

KEY, SOCKET HEAD SCREW: IAW BUREAU OF ORDANCE NAVY DEPT DRAWING 856295, REV. 3, DATED 20 MAR 67. ASSEMBLY 856295-3. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PLIERS, SPECIAL: IAW DEPARTMENT OF THE NAVAL SEA SYSTEMS COMMAND DRAWING NUMBER 5268094, DATED 2-4-81 EXCEPTION TO DRAWING: USE THE FOLLOWING SUBSTITUTIONS: 1) AWS C3.4 SPECIFICATION FOR TORCH BRAZING; 2) AWS C3.5 SPECIFICATION FOR INDUCTION BRAZING;

PULLER, MECHANICAL: IAWGSA DRAWING NUMBER 00-309-9500 DATED 9/12/96 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

CRANK TOOL, HAND: IAW NAVAL SHIP ENGINEERING CENTER DRAWING REC102187, REV B THE TOOL CONSISTS OF TWO (2) COMPONENTS: HANDLE AND ADAPTER (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

ADAPTER, TORQUE WRENCH:IAW U.S. NAVAL SHIP SYSTEMS COMMAND DRAWING NUMBER 2588756, REV. A. EXCEPTIONS TO DRAWING: USE MIL-S-46172 IN LIEU OF MIL-S-13048 USE ASTM A304IN LIEU OF QQ-S-624 USEQQ-S-698 IN LIEU OF QQ-S-626 COATING: CHROME (EXCEPTIONS APPL

LAPPING TOOL JIG, VALVE SEAT: IAW NAVAL SHIP SYSTEMS COMMAND DRAWING 803-2177525, REVISION H, DATED 24 AUG 83. FOR 1-1/2 INCH VALVE SZ PIECE NUMBER 53. APPLICABLE INFORMATION ON SHEETS 2, 3, AND 16. EXCEPTION TO DRAWING: COATING: USE CHROME NICKEL OR

WRENCH, VALVE SEAT RING: IAW GSA DRAWING NUMBER 394-7630 COATING: OXIDE (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, VALVE SEAT RING: IAW DEPARTMENT OF THE NAVY, NAVAL SHIP SYSTEMS COMMAND, DRAWING NUMBER 803-2177917 PIECE NUMBER 29 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

INSERTER AND REMOVER, THERMOSWITCH: IAW NAVAL SEA SYSTEMS COMMAND DRAWING 3245106, REV E, DATED 16 AUGUST 1988. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

ADAPTER, TORQUE WRENCH: IAW U. S. ARMY TANK AUTOMOTIVE COMMAND DRAWING 12298105 REVISION A, DATED 4/15/82. PN 12298102-2 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

TWEEZERS, CRAFTSMAN'S: IAW WAGNER ELECTRIC CORP. DRAWING NUMBER DT1973A, REVISION A DATED MAY 10, 1975. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, OPEN END: IAW DEPARTMENT OF THE NAVY NAVAL SEA SYSTEMS COMMAND DRAWING NUMBER 5525401, DATED MARCH 17, 1981. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

LOCATING, PIECE: IAW DEPARTMENT OF THE NAVY BUREAU OF NAVAL WEAPONS DRAWING NUMBER 1222287. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

EXTRACTOR, CONDENSER: IAW GSA PD DRAWING NUMBER: 00-305-2297 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, SPANNER: IAW DEPARTMENT OF THE NAVY NAVAL ORDNANCE SYSTEMS COMMAND DRAWING NUMBER 2645227, REVISION C. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

KEY, SOCKET HEAD SCREW: IAW NAVAL AIR ENGINEERING CENTER DRAWING 425786 DATED 6-27-84. PN. 425786-1. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

SCREWDRIVER ATTACHMENT, SOCKET WRENCH: IAW U.S. ARMY RESEARCH & DEVELOPMENT COMMAND DRAWING NUMBER 9379286, REVISION B, DATED 12/21/84, PN 9379286-1. EXCEPTION TO DRAWING: USE ANSI Y14.5M-82 IN LIEU OF MIL STD 8. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTI

INSERTER AND REMOVER, THERMOSWITCH: IAW NAVAL SEA SYSTEMS COMMAND DRAWING 3245106, REV E, DATED 16 AUGUST 1988. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

SCREWDRIVER, FLAT TIP: IAW NAVAL SURFACE WARFARE CENTER DRAWING NUMBER SA613227-1 (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

WRENCH, OPEN END: IAW ASME B107.100-2020, FLAT WRENCHES. CAT 6 WRENCH,BOX FORMERLY 1B107.6-1 CAT 8 ADJUSTABLE WRENCHES FORMERLY 1B107.8 CAT 9 BOX WRENCHES, DOUBLE HEADFORMERLY 1B107.9 CAT 21WRENCH, CROWFOOT FORMERLY1B107.21 CAT 39 OPEN ENDWRENCHES, D

WRENCH, OPEN END: IAW THE DEPARTMENT OF THE NAVY, NAVAL ORDNANCE SYSTEMS COMMAND DRAWING NUMBER 300435, DATED 8 DEC 71, REVISION B1 OVERALL LENGTH: 5 INCHES WRENCH OPENINGS: .38 INCH MINIMUM AND .388 INCHES MAX BOTH ENDS OVERALL LENGTH: 5 INCHES SMAL

DRIVER, LOCKRING: IAW ORDNANCE CORPS, DEPARTMENT OF THE ARMY DRAWING NUMBER 9171792 REVISION A,DATED 9/29/60 EXCEPTIONTO DRAWING: FINAL PROTECTIVE FINISH SHALL BE BLACK OXIDE IN LIEU OF CADMIUM PLATING (EXCEPTIONSAPPLY) (PARTIAL DESCRIPTION)

LAPPING TOOL, VALVE: IAW NAVAL SHIP SYSTEMS COMMAND DRAWING NUMBER 803-2177525 REVISION H, DATED 08/24/83. PN 803-2177525-50 SZ: 1/2 - 3/4 INCH VALVE (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

HOOK, MATERIAL HANDLING, HAND: IAW GSA DRAWING 288-6527, DATED 7 JULY 1987. (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION)

PLIERS, SPECIAL: IAW DEPARTMENT OF THE NAVAL SEA SYSTEMS COMMAND DRAWING NUMBER 5268094, DATED 2-4-81 EXCEPTION TO DRAWING: USE THE FOLLOWING SUBSTITUTIONS: 1) AWS C3.4 SPECIFICATION FOR TORCH BRAZING; 2) AWS C3.5 SPECIFICATION FOR INDUCTION BRAZING;